tor

Features:

• TOR exclusive USA-engineered rubber bushings ensure maximum durability and safety
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• TOR engineered quad-lip seal provides maximum contaminants protection
• Powdered metal formula enhances strength and durability
• Bushings are assembled with the proper pre-compression to provide the ultimate in performance and feel
• High temperature synthetics and fatigue resistance support extended service life, even in harsh conditions
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Rearward Suspension Control Arm Bushing (Both Side)
• Part Reference Numbers : BK201725 BC43039XL BC43039PR BC43039 GS70461 MS70461 K201725 2674590 TK201725

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500091 BJ55045XL BJ55045PR BJ55045 GS80504 MS80504 K500091 2601761 4522186Z00 96328437 TK500091

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500384 BJ74325PR BJ74325XL BJ74325 GS86575 MS86575 K80301 K500384 2601722 TK80301

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500260 BJ59415XL BJ59415PR BJ59415 GS60526 MS60526 K500260 1060526 2601753 51360SLNA02 BA500260

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500366 BJ58025PR BJ58035PR BJ58035XL BJ58115PR BJ58115XL 539-745 539-746 539-756 BJ58025XL BJ58035 BJ58025 GS60525 MS60525 K500455 K500366 K500460 1060525 06510TBAA00 5122030AA01 51220T20A01 51220T20A02 51220TBAA01 51220TLA

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500378 BJ63175XL BJ63175PR BJ63175 GS90523 MS90523 K500378 1090523 2601916 54530A9000 CP1777

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500136 BJ65215PR BJ65215XL BJ65215 SEE GS76501 SEE MS76501 K500136 2601821 CP1236 TK500136

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-104405 KTR-104450 KTR-104489
• Part Reference Numbers : BK761215 CB65203PR CB65203 MS761215 GS761215 CMS761215 CK623508 K623508 RK623508 2608540 CP5569 CB4027 BK761216 CB65204PR CB65204 MS761216 GS761216 CMS761216 CK623509 K623509 RK623509 2608541 CP5570 CB4028

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Part Reference Numbers : CM1163 CM1165 CB59493PR CB59493 MS601239 GS601239 CMS601239 CK623650 CK623651 K623650 K623651 RK623650 RK623651 2608643 CP5543 CM1162 CM1164 CB59494PR CB59494 MS601240 GS601240 CMS601240 CK623649 CK623652 K623649 K623652 RK62

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-100063 KTR-100534 KTR-102629
• Part Reference Numbers : BK620041 CB65033PR CB65033 MS20432 GS20432 CMS20432 CK620041 CK620068 K620041 K620068 RK620068 RK620041 123402 2605595 TK620041 TK620068 BK620040 CB65034PR CB65194PR CB65034 CB65194 MS20433 GS20433 CMS20433 CK620040 CK620067

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-103126 KTR-103132
• Part Reference Numbers : BK623344 CB72063PR CB72063 MS801114 GS801114 CMS801114 CK623344 K623344 RK623344 1411108 2607797 20202AJ01A 20202AJ01C 20202AJ05A CP5210 CB4012 BK623343 CB72064PR CB72064 MS801115 GS801115 CMS801115 CK623343 K623343 RK623343

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-104345
• Part Reference Numbers : BK501255 CM1251 CB91543PR CB91543 MS501255 GS501255 CMS501255 RK623586 2608691 13466362 23403024 39001025 39089342 84035532 84289689 CP5667 CB4020 BK501254 CM1250 CB91544PR CB91544 MS501254 GS501254 CMS501254 RK623587 2608690

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Part Reference Numbers : BK623491 CB86173PR CB86173 MS401247 GS401247 CMS401247 CK623491 K623491 RK623491 2608672 TK623491 BK623490 CB86174PR CB86174 MS401248 GS401248 CMS401248 CK623490 K623490 RK623490 2608673 TK623490

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-104316 KTR-104349
• Part Reference Numbers : BK623549 CB59423PR CB59423 MS601229 GS601229 CMS601229 CK623549 K623549 RK623549 2608585 CP5538 CB4014 BK623548 CB59424PR CB59424 MS601230 GS601230 CMS601230 CK623548 K623548 RK623548 2608586 CP5539 CB4015

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-100237 KTR-100606 KTR-102689
• Part Reference Numbers : BK622265 CB63233PR CB63233 MS901037 GS901037 CMS901037 CK622265 K622265 RK622265 2607993 545004D100 545004D101 TK622265 BK622266 CB63234PR CB63234 MS901038 GS901038 CMS901038 CK622266 K622266 RK622266 2607994 545014D100 54501

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Part Reference Numbers : BK621477 CB75263PR CB75263 MS86181 GS86181 CMS86181 CK621477 K621477 RK621477 118168 2606439 TK620725 BK621476 CB75264PR CB75264 MS86182 GS86182 CMS86182 CK621476 K621476 RK621476 28168 2606440 TK620724

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Kit Variations: KTR-100201 KTR-100590 KTR-102628
• Part Reference Numbers : SK620025 CB14183PR CB14183 MS10190 GS10190 CMS10190 CK620025 K620025 RK620025 109101 2606329 31121096221 31126758533 TK620025 SK620026 CB14184PR CB14184 MS10191 GS10191 CMS10191 CK620026 K620026 RK620026 119101 2606330 311210

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Part Reference Numbers : BK623733 CB63293PR CB63293 MS901245 GS901245 CMS901245 CK623733 K623733 RK623733 2608680 CP5697 CB4023 BK623734 CB63294PR CB63294 MS901246 GS901246 CMS901246 CK623734 K623734 RK623734 2608681 CP5698 CB4024

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Part Reference Numbers : BK623298 CB91373PR CB91373 MS501184 GS501184 CMS501184 CK623298 K623298 RK623298 1481105 2608234 CP5160 TK623298 BK623299 CB91374PR CB91374 MS501185 GS501185 CMS501185 CK623299 K623299 RK623299 1581105 2608235 CP5276 CP5281 T

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side)
• Part Reference Numbers : BK623281 BK901214 CB60353PR CB60353 MS901214 GS901214 CMS901214 CK623281 CK623539 K623281 K623539 RK623281 RK623539 1412109 2608248 545002W200 545002W600 CP5269 BK623282 BK901215 CB60354PR CB60354 MS901215 GS901215 CMS901215

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Outer Steering Tie Rod End (Both Side) + 2x Front Inner Steering Tie Rod End (Both Side)
• Kit Variations: KTR-103771
• Part Reference Numbers : BES3548 T3548PR T3548XL TO74483PR TO74483XL TO74483 T3548 GES3548 MES3548 ES3548 2693139 TES3548 BES3547 T3547PR T3547XL TO74484PR TO74484XL TO74484 T3547 GES3547 MES3547 ES3547 2693140 TES3547 BEV433 IS433PR IS433XL IS433 GE

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Part Reference Numbers : BES2946L BES3332R T3332PR TO59101XL T3332XL TO59101PR T3332 TO59101 GS60619 MES2946 MES2946L MES3332 GES2946L GES3332R MES3332R MS60619 ES2946 ES2946L ES3332 ES3332R ES800592 2692925 2693705 TES2946L TES3332R TES800592
• Kit Includes: 2x Front Outer Steering Tie Rod End (Both Side) + 2x Front Inner Steering Tie Rod End (Both Side)
• Part Reference Numbers : BES2946L BES3332R T3332PR TO59101XL T3332XL TO59101PR T3332 TO59101 GS60619 MES2946 MES2946L MES3332 GES2946L GES3332R MES3332R MS60619 ES2946 ES2946L ES3332 ES3332R ES800592 2692925 2693705 TES2946L TES3332R TES800592 BES294

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Outer Steering Tie Rod End (Both Side) + 2x Front Inner Steering Tie Rod End (Both Side)
• Kit Variations: KTR-103858
• Part Reference Numbers : BES800806 TO14251XL TO14251PR TO14251 GS10679 MS10679 ES800806 2693930 TES800806 BES800805 TO14252XL TO14252PR TO14252 GS10680 MS10680 ES800805 2693931 TES800805 BEV800715 TI14060XL TI14060PR TI14060 GS10748 MS10748 EV800715

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Part Reference Numbers : BES3601 T3601XL T3652XL T3601PR T3652PR T3601 T3652 GES3601 GES3652 MES3601 MES3652 ES3601 2693231 TES3601
• Kit Includes: 2x Front Outer Steering Tie Rod End (Both Side) + 2x Front Inner Steering Tie Rod End (Both Side)
• Part Reference Numbers : BES3601 T3601XL T3652XL T3601PR T3652PR T3601 T3652 GES3601 GES3652 MES3601 MES3652 ES3601 2693231 TES3601 BES3600 T3600XL T3648XL TO75185XL T3600PR T3648PR TO75185PR T3648 T3600 TO75185 GES3600 MES3648 MES3600 ES3600 2693232

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
• Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Outer Steering Tie Rod End (Both Side) + 2x Front Inner Steering Tie Rod End (Both Side)
• Kit Variations: KTR-103769
• Part Reference Numbers : BES3535 TO96041XL TO96265PR TO96041PR TO96265XL TO96041 TO96265 GES3535 MES3535 ES800087 ES3535 2693175 2693629 TES3535 TES800087 BES3536 BES800088 T3536PR TO96042XL T3536XL TO96042PR T3536 TO96042 GES3536 MES3536 ES800088 ES